Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Veritas 8 Power light flashing?
22-05-2012, 10:24 PM
Post: #1
Veritas 8 Power light flashing?
05-01-2011 02:38 PM


Was wondering if you could advise me as to the problem with my house alarm.

I have a Veritas 8 alarm and it has been in good working order for the last three years, it is 6 years old.

The unset green light on the key pad is flashing constantly and I cannot set it as it makes a different beeping noise and wont set.

Most forums suggest I call an engineer as the pre set time for service may have elapsed?

Hoping you may have a different suggestion.

RE: Veritas 8 Power light flashing? - marty - 05-01-2011 06:40 PM

The power light on the control panel is a status indicator for the battery charging circuit, A steady light meaning normal. A flashing light means action required - mains power can still be present
Always use a suitable mains test instrument to confirm power is no longer present.......

The above is taken from the Veritas 8 manual - Having not worked on one for a while I take it you will need a new back-up battery in the control panel - Other panels also indicate a blown fuse in the same way.

RE: Veritas 8 Power light flashing? - Rem Alarms - 05-01-2011 09:27 PM

Flashing green light can mean either dead battery or no mains supply. Wise words re mains.

Find all posts by this user
Quote this message in a reply
Post Reply 

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Texecom/veritas model unknown coopern 3 100 24-04-2015 11:56 PM
Last Post: SafeNet
  Veritas pannel issue Mushlarky 1 170 02-12-2014 09:50 PM
Last Post: Rem Alarms
  Veritas R8 - moving sensor cables Nakki 11 901 27-10-2014 09:02 PM
Last Post: Rem Alarms
  Texecom Veritas R8 keypad malfuntioning 1 1,158 14-11-2013 08:01 PM
Last Post: Rem Alarms
  reset veritas 8? skywalker 3 1,593 17-02-2013 06:24 PM
Last Post: electrician
  veritas 8 alarm battery change Guest 3 16,696 15-08-2012 09:05 PM
Last Post: GB Surveillance
  Cannot reset my Veritas R8 plus Panel Guest 4 3,874 03-06-2012 03:57 PM
Last Post: engels7570
  varitas r8 problems after power-cut Old Posts 1 1,254 02-06-2012 11:33 PM
Last Post: Old Posts
  texecom veritas keypad dead during power-cut Guest 4 4,457 28-05-2012 09:45 PM
Last Post: engels7570
  Veritas code problem - can you help? Old Posts 0 2,056 22-05-2012 10:36 PM
Last Post: Old Posts

Forum Jump:

User(s) browsing this thread: 1 Guest(s)